TwinTeeh Basic Framework Kit
279,00€
SKU: SKUK002
You will need this kit to build the framework of TwinTeeeth Basic Edition.
It includes most of the hardware: Aluminum bed and stencil, aluminum supports columns, linear and delta motion hardware, anti-backlash nuts, etc.
Together with TwinTeeth Printed Parts form the basic framework of TwinTeeth. This kit is your best option If you own a 3D printer to print the plastic parts.
The kit includes the following materials:
| SKU | QTY | Name |
|---|---|---|
| SKU0100 | 1 | Alumininum Fixture Bed 70 x 80mm |
| SKU0101 | 1 | Alumininum round tube 20mm dia. x 10.5mm (bed attachment) |
| SKU0102 | 1 | Aluminium PCB Drilling Stencil 70 x 80mm |
| SKU0103 | 8 | 2.5 x 8mm precision dowel pins |
| SKU0104 | 8 | 2.5 x 6mm precision dowel pins |
| SKU0012 | 3 | 20x20x1.5mm - 400mm Aluminium square tube |
| SKU0902 | 6 | Steel rods - 304x6mm (2 meters) |
| SKU0901 | 3 | Acme threaded rods 200x10mm - 3mm pitch |
| SKU0900 | 6 | LM6UU linear bearing |
| SKU0903 | 6 | F6900ZZ bearing 10x22x6mm |
| SKU0904 | 3 | Metal motor coupplers 10x5mm |
| SKU0303 | 12 | Hollow rod ends with Balls #5347 |
| SKU0301 | 6 | Glass fiber rods 6x3x136mm |
| SKU0203 | 6 | Half anti-backlash epoxy nuts |
| SKU0010 | 1 | Male DB15 Connector 2 rows |
| SKU0204 | 3 | Springs 6mm(OD)x4mm(ID) x 15mm(L) - 0.9mm wire -7.85 N/mm (You will cut them to obtain the 6 x 7mm (L) need it). |
| SKU0800 | 1 | USB Camera + cable |
| SKU0011 | 6 | 20x20mm square plastic tubing end plug |
| SKU0013 | 3 | 42x42x4mm cork pieces (motor foot) |
| SKU0104 | 1 | 2.5 x 10mm copper wire |
| SKU0302 | 12 | M3 x 10mm threaded rod |
| SKU1015 | 14 | Zip-tie 2.5x100mm |
| SKUT214 | 3 | M2 x 14mm plain screws (endstops) |
| SKUT308 | 18 | M3 x 8mm allen screws |
| SKUT310 | 30 | M3 x 10mm allen screws |
| SKUT312 | 5 | M3 x 12mm allen screws |
| SKUT316 | 30 | M3 x 16mm allen screws |
| SKUT318 | 9 | M3 x 18mm allen screws |
| SKUT320 | 14 | M3 x 20mm allen screws |
| SKUT330 | 6 | M3 x 30mm allen screws |
| SKUT430 | 9 | M4 x 30mm allen flat head screws |
| SKUT480 | 1 | M4 x 250mm threaded rod (3 pieces of 80mm for retainers) |
| SKUTN02 | 3 | M2 nuts |
| SKUTN03 | 105 | M3 nut |
| SKUTN04 | 18 | M4 nut |
| SKUTW03 | 43 | M3 washer |
| SKUTY03 | 6 | M3 nylock nuts |
| SKUS002 | 1 | Graphite powder bag |
Additionaly you will need the following materials (NOT INCLUDED in the kit) to complete the framework:
| QTY | Name |
|---|---|
| 1 | Framework 3D Printed Parts - See How to Get it section |
| 1 | Set of Electronics & Motors |
| 1 | One way male/female connector (Spring telephone cable) |
| 1 | Epoxy glue |
| 1 | Teflon tape |
| 6 | Drops of oil |
English
Image:
Price: 279,00€